OUTWARDEN × Leatherius Woodman – a leather stamping study

From the Practice Log – an ongoing series of stamping studies on real-world logos.

A September study.

For OUTWARDEN.

First, we set the name to work as a fence. OUTWARDEN in wide capitals, every stem carried down to one shared ground line – the word builds its own palisade.

The black and white OUTWARDEN Palisade logo artwork for leather stamping and single color printing.

In color we proposed iron charcoal with a single band of warning amber.

The OUTWARDEN Palisade identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

On the black journal the press reads as pure shadow relief. Looks great when stamped onto the leather.

A black leather journal blind debossed with the OUTWARDEN Palisade logo.

And on the machine itself, the fence line runs the length of the hull.

The OUTWARDEN security robot wears the proposed Palisade printed livery from this leather and brand identity study.

Next, the beacon. A mast on a stepped base with its light just switched on – the same silhouette the robot raises in the field.

The black and white OUTWARDEN Waymark logo artwork for leather stamping and single color printing.

Asphalt gray under a high-visibility lime, the working colors of the trade.

The OUTWARDEN Waymark identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

Pressed corner-sized into the gray sand journal.

A gray sand leather journal blind debossed with the OUTWARDEN Waymark logo.

The livery keeps the lime where the eye expects it, low and bright.

The OUTWARDEN security robot wears the proposed Waymark printed livery from this leather and brand identity study.

Then we drew the patrol itself. A dashed circuit rings the name, and one solid square is out on the lower run – the warden, mid-round.

The black and white OUTWARDEN The Rounds logo artwork for leather stamping and single color printing.

We set it in circuit green on paper white.

The OUTWARDEN The Rounds identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

It looks genuinely beautiful on the forest green journal.

A forest green leather journal blind debossed with the OUTWARDEN The Rounds logo.

On the hull, the circuit wraps the panel and the square keeps moving.

The OUTWARDEN security robot wears the proposed The Rounds printed livery from this leather and brand identity study.

Every guard outfit wants a dog, so we built one to match the machine – a hound squared off into boxes, rolling on two small wheels.

The black and white OUTWARDEN Boxhound logo artwork for leather stamping and single color printing.

We gave it hound blue with a flash of sun yellow.

The OUTWARDEN Boxhound identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

The caramel journal suits it – collar leather.

A caramel leather journal blind debossed with the OUTWARDEN Boxhound logo.

And a patrol robot with a dog on its side is a patrol robot people wave at.

The OUTWARDEN security robot wears the proposed Boxhound printed livery from this leather and brand identity study.

For the night shift, an owl. It stands square on a straight perch, eyes open, the name beneath.

The black and white OUTWARDEN Warden Owl logo artwork for leather stamping and single color printing.

Deep pine with moon cream; the eyes take the amber.

The OUTWARDEN Warden Owl identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

Looks absolutely gorgeous when stamped onto the dark espresso journal.

A dark espresso leather journal blind debossed with the OUTWARDEN Warden Owl logo.

We reached back for the watchman's lantern and gave it a four-point spark for a flame – the oldest job in the trade, still walking its rounds.

The black and white OUTWARDEN The Lantern logo artwork for leather stamping and single color printing.

Lamp black over oxblood, with brass at the spark.

The OUTWARDEN The Lantern identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

The sangria journal carries it like an old ledger.

A sangria leather journal blind debossed with the OUTWARDEN The Lantern logo.

After that, an eye whose lower lid runs on past both corners to become the horizon – the whole field held in one glance.

The black and white OUTWARDEN Open Eye logo artwork for leather stamping and single color printing.

Watch teal on field sand.

The OUTWARDEN Open Eye identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

On the pale sea-blue journal the impression sits calm and cool.

A pale sea blue leather journal blind debossed with the OUTWARDEN Open Eye logo.

A monogram for the gate: the W of WARDEN stands inside the O of OUT, its center post rising to brace the ring.

The black and white OUTWARDEN Gate Ward logo artwork for leather stamping and single color printing.

Gate navy with steel.

The OUTWARDEN Gate Ward identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

Pressed into the country gray journal.

A country gray leather journal blind debossed with the OUTWARDEN Gate Ward logo.

Then a proper badge, made for patches and gatehouse doors. The site is drawn as a square with the warden a single dot at its corner, and the name runs around the rim.

The black and white OUTWARDEN Perimeter Badge logo artwork for leather stamping and single color printing.

Black and white, with a seal red center for print.

The OUTWARDEN Perimeter Badge identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

Looks great when stamped onto the poppy red journal.

A poppy red leather journal blind debossed with the OUTWARDEN Perimeter Badge logo.

And finally, the one we liked the most. One star over one horizon, the name on the line – the watch that holds until first light.

The black and white OUTWARDEN First Light logo artwork for leather stamping and single color printing.

Night navy under a dawn gold star.

The OUTWARDEN First Light identity board presents the proposed color logo and reversed mark alongside the leather stamping study.

On the blueberry journal, a night sky you can carry.

A blueberry leather journal blind debossed with the OUTWARDEN First Light logo.


We made this out of love. Leatherius Woodman is on a mission to create and share artifacts of beauty, craft and love – this study is one of them, and we hope the feeling is mutual. Every image is a render – how we prototype before cutting a die.

If you're OUTWARDEN and you'd like these made real, or anything here changed – say hello through our contact page.