Will a Leather Camera Strap Fit Your Camera? A Body-by-Body Answer

Leather camera strap with a snap hook attachment, shown for camera compatibility

If your camera has a pair of standard strap lugs, a leather strap fits it. That covers the Fujifilm X100 series, every interchangeable-lens body from the major makers, and almost every film camera made since the 1960s. The real decision is which of the two attachments to order.

Leatherius Woodman makes a snap hook attachment for light bodies and a leather belt attachment for heavy cameras, both $49.50 in full-grain leather. Pick the belt attachment when the body carries a large lens, and the snap hook when the camera is compact or moves between two shooters.

Leather camera strap with a snap hook attachment, shown for camera compatibility
The snap hook attachment, the quicker of the two to move between bodies.

Body by body

Camera Fits Attachment to choose
Fujifilm X100 series Yes Snap hook
Fujifilm X-T series Yes Snap hook, belt attachment with a fast zoom
Canon R6 Yes Snap hook, belt attachment with a telephoto
Canon R5 with a heavy lens Yes Belt attachment
Nikon Z bodies Yes Snap hook
Nikon Zf Yes Snap hook, in a warm brown to suit the retro body
Sony a7 series Yes Snap hook
Sony a6000 and similar compacts Yes Snap hook
Leica Q Yes Snap hook
Leica M Yes Snap hook
OM System and Olympus bodies Yes Snap hook
Panasonic Lumix bodies Yes Snap hook
Canon Rebel and entry DSLRs Yes Snap hook
Nikon D750 and similar DSLRs Yes Belt attachment
Any body with a battery grip Yes Belt attachment
Compact with a single small eyelet Check the opening Snap hook, if the eyelet admits it

The one thing to check first

Look at your camera's strap lugs. Two lugs, one on each side of the body, is the standard arrangement and the one these straps are built around. Some cameras ship with small metal triangular rings already fitted into those lugs, which is fine, and some have a bare slot. Compacts occasionally have a single tiny eyelet meant for a wrist cord, which is the one case where a full camera strap may not be the right answer. If the eyelet is smaller than a shoelace hole, measure before ordering.

How the strap actually goes on is covered separately in how to attach a leather camera strap to Sony and Fuji strap lugs.

Retro bodies deserve the brown

The Nikon Zf, the Fujifilm X100 series and the Leica Q were all designed to look like cameras from an earlier era, and the black nylon strap in the box works against that. Caramel is the obvious pairing for a silver-top body, with Sicilian Brown as the deeper alternative. There is a full walk through the pairings in what color strap suits your camera body.

Full-grain leather camera strap belt attachment for heavy bodies and long lenses
The belt attachment, the version to order for a heavy setup.

Heavy setups, grips and long lenses

A body with a battery grip and a 70-200 attached is a genuinely heavy object to hang from your neck for a day. That is the situation the belt attachment exists for, and it is worth choosing even if your everyday setup is lighter, because the strap will still carry a small mirrorless perfectly well. Working through the reasoning in detail: best camera strap for a heavy DSLR and big lens and belt attachment vs snap hook.

Brackets, cages and half cases

A tripod plate or an L bracket lives on the base of the camera, while the strap attaches at the shoulders of the body, so the two occupy different parts of the camera. A half case may cover the lugs depending on how it is cut, so check whether your case leaves them exposed. A camera in a rig cage is usually operated handheld or on a shoulder rig rather than from a neck strap, which puts it outside what these straps are made for.

Moving one strap between cameras

The snap hook version is the one to buy if you shoot two bodies and want a single good strap. It comes off one camera and onto the other in seconds. Photographers who keep both a film body and a digital one usually settle on this arrangement, which is also covered in straps for film and thrifted cameras.

Frequently asked questions

Will a leather camera strap fit a Fujifilm X100?

Yes. The X100 series carries conventional strap lugs, and the snap hook attachment is the right choice for a body that light.

Which attachment suits a Nikon Zf or another retro body?

The snap hook, in a warm brown. Those bodies are light enough that the belt attachment is more than they need, and a brown hide finishes the retro styling the camera is already reaching for.

Does a leather strap work with a camera in a half case?

It depends on the case. If the case leaves the strap lugs exposed, yes. Some cases cover one or both lugs and expect you to use their own attachment points.

Can one strap be moved between two cameras?

Yes, and the snap hook version is designed for exactly that. All straps are $49.50 in the camera strap collection.

Read more

Leather camera strap for photographers, belt attachment version for heavy bodies

Leather Camera Straps by What You Actually Shoot

Leather keychains for a best man proposal box in sixteen colours, each pressed with a different monogram

What Goes in a Best Man Proposal Box: Fillers That Survive the Wedding

Debossed name on a leather camera strap, pressed into full-grain hide

What a Debossed Name Looks Like on a Leather Camera Strap